Z8102AX-M2-T is a 5G/4G+WIFI6 home CPE router, which can access the Internet through 5G/4G mobile communication dial-up or 1000Mbps WAN port, and then share the Internet network through wireless WiFi 6 and 1000Mbps wired LAN.

Product main features

l  Using MT7981B solution, ARM Cortex-A53 dual-core CPU, main frequency up to 1.3GHZ;

l  Adopt independent WIFI6 chip, MT7976CN, the speed is up to 3000Mbps;

l  High-speed 1GB DDR4, with 128MB SPI NAND Flash;

l  1WAN+4LAN 1000M adaptive network port, support automatic flip (Auto MDI/MDIX);

l  Support "one-key flashing mode", that is, long press the reset button to enter the rescue flashing mode;

l  Support "one key " MESH network;

l  Built-in 2 M.2/Mini-PCIE standard interfaces (choose one of the two), which can be used to connect to 5G/4G mobile communication modules;

l  External standard Nano SIM card (small card) interface and built-in eSIM (QFN-8 6mmx5mm) card interface, support SIM/USIM card;

l  External high-gain WIFI antenna, 360-degree wireless signal without dead angle;

Hardware function

Related standard specifications:

l  USB3.0/USB2.0 bus standard

l  PCI- Express bus standard

l  SIM/USIM interface standard

l  IEEE802.11n/g/b/a/ac/ax

l  IEEE802.3/802.3u/802.ab

l  PCI Express M.2 Specification Rev1.1

l  5G/4G mobile communication standard, specifically determined by the selected 5G/4G mobile communication module

Hardware Interface Introduction

Indicator light function introduction

Hardware Platform Introduction

Hardware watchdog function introduction

      This hardware product is designed with a hardware watchdog function. After the hardware watchdog is powered on, it will automatically start up and detect the heartbeat level output by the routing system that jumps once every second. If the routing system itself fails (such as a crash), it will also Naturally, the heartbeat level can no longer be output. At this time, if the hardware watchdog has not detected the heartbeat level within 120 seconds, it will shut down by itself for 15 seconds and then restart the entire system.

When the routing system is running normally, but the 5G/4G module dialing is abnormal, the routing system will control the power supply of the 5G/4G module through GPIO, so that the module will automatically restart to fix the 5G/4G dialing abnormality.

Power Supply And Power Consumption Description

Please use the ZBT standard power adapter to power this product. If you do not use the ZBT standard power supply, please strictly follow the above power specification parameters to power this product, otherwise the product will be damaged. If you use batteries or vehicle power supplies, please take anti-static and anti-surge measures.

WIFI Wireless Parameter Introduction

WIFI EVM Index

WiFi 2.4G

Compatible with IEEE 802.11 b/g/n/ac/ax, supports 20MHz or 40MHz, modulation method 1024-QAM / OFDMA, adopts 2T2R MU-MIMO antenna technology, and the maximum connection rate is up to 574Mbps. The following is a description of the power frequency, receiving sensitivity, and transmitting power of 2.4G WIFI.

WiFi 5.8G

Compatible with IEEE 802.11 a/an/ac/ax, supports 20MHz, 40MHz, 80MHz, 160MHz, modulation method 1024-QAM / OFDMA, adopts 2T3R MU-MIMO antenna technology, and the maximum connection rate is up to 2400Mbps. The following is a description of the power frequency, receiving sensitivity, and transmitting power of 5.8G WIFI.

Structural Parameters And Accessories Introduction

Product Working Environment Requirements

9 Software Configuration Information

Above is the general default configuration information of the product. The WIFI SSID of our OS firmware or OPENWRT firmware may be different, but the default IP, WEB login name and password of this product remain unchanged. For other detailed software functions, please refer to the product description.