- New
RicherLink EOC Slave with Gigabit port RL7410T, 700Mbps, 1*GE LAN, 1xF coax connector, Qualcomm chipset, Homeplug AV 2
Kč1,365.10
Tax included
EOC Indoor Master / Slave module with Gigabit Ethernet port - PHY rate 700Mbps, 1*GE LAN, 1* SMA F coax connector,
Special version - RL7410T - for 1GE slave, we have designed a small module, it is with one GE port, it can config to master or slave mode using AVITAR or MSTAr utility. But it is not include duplexer, one SMA to F cable included. See below photo.
It just EOC chip , no switch chip, so it cannot config vlan / tag - Generally eoc slave with wifi or 4 port EOC slave , both have EOC chip+ switch chip integrated cpu, swtich chip can config the vlan tag, but the 1GE port module is without switch chip. so you can connect a separate router after EOC slave.
Security policy
Delivery policy
Return policy
EOC Indoor Master / Slave module with Gigabit Ethernet port - PHY rate 700Mbps, 1*GE LAN, 1* SMA F coax connector,
Product Overview
RL7410T is an EoC Ethernet over Coax Master / Slave module with the access function of internet broadband data.
RL7410T adopt the Qualcomm solution, providing PHY rates of 700Mbps and up to 350Mbps of throughput over Coax in coaxial network.
It has built in 1 EoC module can connect up to 64 EoC terminals according to bandwidth demand.
RL7410T occupies low frequency band under 65Mhz and has no collision with the current CATV system frequency, which can decrease mutual interference. Besides, it supports the current CATV network of tree and chain architecture. enable long distance transmission and enjoys high bandwidth and good network adaptability.,
Description:
Wodaplug EoC product is focused on the use of existing cable television (CATV) infrastructure for Internet access or broadband data transmission for the purpose of being compatible with the existing CATV (or sometimes satellite television) broadcast signals simultaneously transmitted on the same cable. You need one master device and you can connect several Slave devices via coax cable network and create smart Ethernet network in yoru building.
Product Features
Correspond with IEEE HomePlug AV、IEEE 802.3 10/100/1000 Ethernet, IEEE 802.3ah standard；
Occupy the low frequency band under 7.5-65Mhz.Strong ability of ant-interference , high bandwidth
Special version - RL7410T - for 1GE slave, we have designed a small module, it is with one GE port, it can config to master or slave mode using AVITAR or MSTAr utility. But it is not include duplexer, one SMA to F cable included. See below photo.
It just EOC chip , no switch chip, so it cannot config vlan / tag - Generally eoc slave with wifi or 4 port EOC slave , both have EOC chip+ switch chip integrated cpu, swtich chip can config the vlan tag, but the 1GE port module is without switch chip. so you can connect a separate router after EOC slave
Product Specification:
EoC Module One QCA7410 master module
Homeplug RF - Default Occupied Bandwidth:7.5～65MHz , Output Power:≥108dBuV
Connection Type F Connector( SMA)
RF Impedance 75Ω
Standards Compliance IEEE HomePlug AV,IEEE802.3,IEEE802.3x,IEEE802.3u AutoMDI(X)
Protocol TDMA/CSMA
Transmission Speed 500Mbps
Coding Mode Asynchronous
Modulation Mode OFDM
Transmission Distance Not more than 1000 meter
Encryption Mode 128-bitAES
Power 12V input,<10W
Size(LxWxH) 220×133×101mm
Operation Temperature -25～65℃
Storage Temperature -40～70℃
Operation Humidity 10%～90% non-condensing
Storage Humidity 10%～95% non-condensing
RL7410T
25 Items
Comments (0)
No customer reviews for the moment.
16 other products in the same category:
EOC Indoor Master / Slave module with Gigabit Ethernet port - PHY rate 700Mbps, 1*GE LAN, 1* SMA F coax connector,
Special version - RL7410T - for 1GE slave, we have designed a small module, it is with one GE port, it can config to master or slave mode using AVITAR or MSTAr utility. But it is not include duplexer, one SMA to F cable included. See below photo.
It just EOC chip , no switch chip, so it cannot config vlan / tag - Generally eoc slave with wifi or 4 port EOC slave , both have EOC chip+ switch chip integrated cpu, swtich chip can config the vlan tag, but the 1GE port module is without switch chip. so you can connect a separate router after EOC slave.