- Out-of-Stock
Wodaplug1000 EOC Master 7.5Mhz-86Mhz / AV2, 1000Mbps, DM1002A, 2xF, GE
This new MSTAR 1000chip Homeplug AV2 based EOC master can offer 500 Mbps real troughput over existing coax cable network for long range up to 1km. Can work together with Wodaplug 1000 AV2 EOC slaves.
WEB management and CLI based configuration.
Feature
-
Support 500M bandwidth when work in 7.5M-86Mhz/AV2 togtehr with Wodaplug 1000 EC slaves
- Support up to 50 end user slave modems in real environment.
Security policy
Delivery policy
Return policy
1000M EOC master (AV2), indoor, 2*F connector, 2*LAN 10/100/1000Mb
This new version is based on the MSTAR 1000 chipset and Homeplug AV2 protocol. The Wodaplug 1000 EOC master offers a real throughput of 500 Mbps over existing coaxial distribution over a long distance of up to 1 km. Works with Wodaplug 1000 AV2 EOC Slave units. Caution, it's not compatible with Slave units from the previous EOC1121 series. Suitable for new installations where higher overall throughput and a higher number of clients are required. It is also can become suitable for increasing number of connected clients in existing distribution systems, either by replacing existing EOC modems or by adding new independent modems to the same distribution system, but it is necessary to assume a decrease in transmission speeds due to sharing bandwidth with already installed EOC devices. The principle of installation and functions are the same as the previous version, the frequency band used is extended to 86MHz in order to increase the speed. It coexists with TV and SAT signal without problems and without interference.
Properties
- 500 M bandwidth support when working on 7.5 M-86 MHz / AV2 together with Wodaplug 1000 EC slave
- Support up to 50 end user slave modems in real environment
Technical parameters
Parameters |
Specification |
||
Chip |
1000 |
||
Work frequency |
7.5~86MHz (AV2 mode), |
||
Output Power |
≥105dBμV |
||
Receive Sensitivity |
25-30dBμV |
||
RF Connector |
F type Female socket(English system) |
||
Output impedance |
75Ω |
||
Modulation mode |
OFDM BPSK QPSK 16/32/64/128/256/512/1024/2048/4096QAM |
||
Work mode at MAC layer |
CSMA/CA,TDMA |
||
|
Physical layer:1000Mbps MAC layer: 500Mbps |
||
Throughput rate |
500Mbps |
||
Eth Connector |
RJ-45 |
||
Standard |
IEEE802.3,IEEE802.3af, 10/100/1000Base-T |
||
Smart bit |
64Byte~1518Byte |
||
VLAN |
IEEE802.1Q (VLAN lagging) |
||
Security |
128-bit AES data encryption |
||
Qos |
Support 802.1P Support the priority number:8 Support different business isolation for different users Support different business isolation for one user Support the isolation between business and software upgrading |
||
EoC SNMP |
Meet HomePlug AV/IEEE P1901 relative standard |
||
Management |
Support SNMP, local WEB or CLI interface |
||
Power supply |
AC60V |
||
Operating Temp. |
-20℃~+70℃ |
||
Power consumption |
<10W |
||
Relative Humidity |
Less than 95% |
||
Gas pressure |
70kpa~106kpa |
||
No causticity gas, no dust, no magnetic field disturb |
|||
In the real operation, there is no filter noise problem. when working at -20℃~+70℃, no hang. |
WEB Network Management
Connect master to PC by any Eth port of master,ensure that the computer network segment and Master network segment are in the same network segment (Master default is 192.168.1.6).
Open IE browser, input Master IP address(192.168.1.6) to login WEB interface.The default system name and password both are admin.
Note: When master is restored to the default settings, IP address is 192.168.1.6
You might also like